China Planetary Gearbox for Stepper DC Motor design of planetary gearbox

Solution Description

 

Product Description

The reducer is typically used for minimal-pace and substantial-torque transmission equipment. The motor, interior combustion motor or other substantial-velocity working electricity is utilized to attain the function of deceleration by meshing with the huge equipment on the output shaft via a gear with a modest variety of tooth on the enter shaft of the reducer. The reducer will also have a number of pairs of gears with the exact same principle to obtain the best reduction result. The ratio of the number of tooth of the large and little gears is the transmission ratio.
 

SPECIFICATIONS Phase RATIO RATED TORQUE (N.m)
PLF60-60mm L2
Sq. Flange Planetary Gearbox
L1 four 25
five 28
seven 20
10 10
L2 sixteen 30
20 30
25 32
28 30
35 30
forty 25
50 25
70 20
Adapted motor ∅ 8-fourteen/ ∅38.1-2/∅F47.14-M4
Rated Enter Speed (rpm) 1000/min
Max Input Velocity (rpm) 2000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.seventy five
L2 1
IP 54
Installation approach Any installation technique

 

Generation Assortment

Listed here is our all goods record. If you would like to know CZPT sort of planetary gearbox, make sure you CLICKING Image to check out much more particulars.  

 

42 Series Planetary Gearbox

Backlash: 10-fifteen arcmin

Ratio Variety:

L1: 4,5,7,ten,

L2: twelve,16,twenty,25,28,35,40,fifty,70

Body Dimension: 42mm Enter Flange

Equipment Arrangement: Planetary Straight Teeth

sixty Series Planetary Gearbox

Backlash: ten-fifteen arcmin

Ratio Selection:
L1: 4,5,7,10,
L2: sixteen,twenty,twenty five,28,35,forty,fifty,70
Body Dimension: 60mm Enter Flange
Equipment Arrangement: Planetary Straight Enamel

ninety Series Planetary Gearbox

Backlash: 10-15 arcmin
Ratio Variety:
L1: 4,5,7,ten,
L2: sixteen,twenty,twenty five,28,35,forty,50,70
Frame Dimension: 90mm Enter Flange
Equipment Arrangement: Planetary Straight Tooth

Powder Metallic Series Planetary Gearbox

Backlash: ten-15 arcmin
Ratio Selection:
L1: 4,5,7,ten,
L2: 16,twenty,25,28,35,40,fifty,70
Frame Dimension: 42mm & 57mm
Gear Arrangement: Planetary Straight Teeth

Correct Angle Sequence Planetary Gearbox

Backlash: 10-fifteen arcmin
Ratio Choice:
L1: 4,5,7,ten,

L2: sixteen,20,twenty five,28,35,40,fifty,70
Body Dimension: 60mm & 90mm
Equipment Arrangement: Planetary Straight Tooth

 

Application Subject

Computerized Arms

 

Assembly Line

 

3D-Printer

 

Healthcare -Tools

 

CNC Equipment

 

Tapping Machine

 

Other Automation Products

 

Why Pick Us

 

ZheJiang Substantial Precision Gear Transmission Co., Ltd

 

 

 

Organization Profile

 

 

ZheJiang Higher Precision Equipment Transmission Co., Ltd positioned in HangZhou city, ZheJiang Province, China. It is a foremost business focused in precision transmission parts and technique study, manufacture and income, various collection of products are produced in its 5000 square CZPT workshop, the precision planetary gearbox and equipment motor are created especially for solar power business and have served a lot of huge-scale photo voltaic projects worldwidely. 

The study team has more than 15 years activities in this field, who can make sure a punctual and successful services to meet up with customer’s certain requirements. It has pasted the ISO9001 high quality management system and CE, items have been exported to tons of international locations with a vast assortment application in AGV, clever robotic, logistic, industrial automation, solar vitality, vessel, packaging and textile etc.Regularly, our objective is to advertise the software of solar power industry in the planet, and we believe it offers clear and sustainable power for humanity to much better defend our surroundings.

WORKSHOP

CERTIFICATIONS

FAQ

 

Q1:Which places are your products primarily utilised in?

A:At existing, we have 2 primary merchandise: precision planetary gear reducer and solar geared motor. Most of the precision planetary reducers are employed in automation fields, such as medical tools, 3D printers, door openers, tapping equipment, CNC lathes and a collection of automation gear. In addition, our photo voltaic geared motors are utilized in photovoltaic energy technology tasks, which are largely merged with rotary drives to push photo voltaic panels to observe daylight.
Q2: How to select the suited planetary gearbox?
A :Initial of all, we require you to be in a position to provide related parameters. If you have a motor drawing, it will let us advocate a ideal gearbox for you more rapidly. If not, we hope you can provide the pursuing motor parameters: output pace, output torque, voltage, present, IP, sound, working problems, motor dimensions and electricity, and so forth.
Q3: What is the cost ?
A : The main figuring out aspect for the price of every product is the buy volume. You can converse with us and allow us realize every other. I imagine that our costs, solution good quality and our solutions can certainly make you satisfied.

This autumn: Do you give custom-made provider?

A: Of course, we give customized services. You only require to put CZPT your demands, and we will do our greatest to provide you with a prepare, make ideas, and try our best to meet up with your requirements.

 

 

Application: Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
PLF60-60mm L2
Square Flange Planetary Gearbox
L1 4 25
5 28
7 20
10 10
L2 16 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 8-14/ ∅38.1-2/∅F47.14-M4
Rated Input Speed (rpm) 1000/min
Max Input Speed (rpm) 2000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation method Any installation method
Application: Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
PLF60-60mm L2
Square Flange Planetary Gearbox
L1 4 25
5 28
7 20
10 10
L2 16 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 8-14/ ∅38.1-2/∅F47.14-M4
Rated Input Speed (rpm) 1000/min
Max Input Speed (rpm) 2000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation method Any installation method

Planetary Gearbox Basics

If you’re in the market for a new Planetary Gearbox, you’ve come to the right place. There’s more to these mechanical wonders than just their name. Learn about Spur gears, helical gears, and various sizes. After you’ve read this article, you’ll know exactly what to look for when shopping for a new one. And you’ll also be able to avoid common mistakes made by amateur mechanics.
planetarygearbox

Wheel drive planetary gearboxes

Planetary gearboxes have numerous benefits over conventional gearboxes. Their compact design is advantageous for servo functions. Their lubrication is a key feature to maintain smooth operation and avoid damage to the gears. Some manufactures use CZPT to ensure proper functioning. These gearboxes have nearly three times the torque of traditional gearboxes while remaining compact and low in mass.
The planetary gears are made of three different types. Each type has an input and output shaft. The input and output shafts are usually coaxially arranged. The input and output shafts are connected to each other via a carrier. The carrier rotates with the planetary gears. The sun gear is the input gear and is typically 24 teeth in diameter. The outer gears are connected to the sun gear via rings of gears that are mounted around the sun gear.
Planetary gearboxes are also used in wheeled and tracked vehicles. They are also used in winch systems, which lift and lower loads. Typical applications include heavy machinery, such as cranes and earthmovers. Wheel drives are also widely used in municipal and agricultural vehicles, as well as material handling vehicles. The wheel drive is typically mounted directly into the wheel rim. A wheel drive may be fitted into two, three, or even four wheels.
A planetary gear set may be used in stages to provide different transmission rates. In order to choose the right gearbox for your application, consider the torque, backlash, and ratio you need. Then, consider the environment where the gearbox is used. Depending on its location, it might need to be protected from weather, water, and other elements. You can find a wide range of different sizes in the market.

Spur gears

There are two basic types of gearheads: planetary and spur gearheads. Each has its advantages and disadvantages depending on the application. This article will discuss the differences between these two types of gearheads. Spur gearheads are commonly used for transmission applications, while planetary gearheads are more widely used for motors. Spur gearheads are less expensive to produce than planetary gearheads, and they are more flexible in design.
There are many different types of spur gears. Among them, a 5:1 spur gear drive ratio means that the sun gear must rotate five times per revolution of the output carrier. The desired number of teeth is 24. In metric systems, the spur gears are referred to as mm and the moon gears as modules. Spur gears are used in many different types of applications, including automotive and agricultural machinery.
A planetary geartrain is a combination of ring and spur gears, which mesh with each other. There are two kinds of planetary geartrains: simple planetary gears and compound planetary gears. Spur gears are the most common type, with a sun gear and ring gear on either side of the sun. Simple planetary gears feature a single sun and ring gear, while compound planetary gears use multiple planets.
A planetary gearbox consists of two or more outer gears, which are arranged to rotate around the sun. The outer ring gear meshes with all of the planets in our solar system, while the sun gear rotates around the ring gear. Because of this, planetary gearboxes are very efficient even at low speeds. Their compact design makes them a desirable choice for space-constrained applications.
planetarygearbox

Helical gears

A planetary helical gearbox has two stages, each with its own input speed. In the study of planetary helical gear dynamics, the base circle radius and full-depth involute teeth are added to the ratio of each gear. The tangential position of the planets affects the dynamic amplifications and tooth forces. The tangential position error is an important factor in understanding the dynamic behaviour of helical planetary gears.
A helical gearbox has teeth oriented at an angle to the shaft, making them a better choice than spur gears. Helical gears also operate smoothly and quietly, while spur gears generate a thrust load during operation. Helical gears are also used in enclosed gear drives. They are the most common type of planetary gearbox. However, they can be expensive to produce. Whether you choose to use a helical or spur gearbox depends on the type of gearbox you need.
When choosing a planetary gear, it is important to understand the helix angle of the gear. The helix angle affects the way the planetary gears mesh, but does not change the fundamentals of planetary phasing. In each mesh, axial forces are introduced, which can either cancel or reinforce. The same applies to torques. So, if the ring gear is positioned at an angle of zero, helical gears will increase the axial forces.
The number of teeth on the planets is a variable parameter that must be considered in the design phase. Regardless of how many teeth are present, each planet must have a certain amount of tooth spacing to mesh properly with the ring or sun. The tip diameter is usually unknown in the conceptual design stage, but the pitch diameter may be used as an initial approximation. Asymmetrical helical gears may also cause undesirable noise.

Various sizes

There are several sizes and types of planetary gearboxes. The planetary gear sets feature the sun gear, the central gear, which is usually the input shaft, and the planet gears, which are the outer gears. A carrier connects the planet gears to the output shaft. The primary and secondary features of the planetary gearbox are important factors to consider. Besides these, there are other things to consider, such as the price, delivery time, and availability around the world. Some constructors are quicker than others in responding to inquiries. While others may be able to deliver every planetary gearbox out of stock, they will cost you more money.
The load share behavior of a planetary gearbox is comparable to that of a spur or a helical gearbox. Under low loads, individual gear meshes are slightly loaded, while other components have minimal deflections. In general, load sharing behaviour is affected mostly by assembly and manufacturing deviations. In this case, the elastic deflections help balance these effects. The load-sharing behavior of a planetary gearbox improves when the load increases.
Planetary gearboxes come in different sizes. The most common size is one with two or three planets. The size and type of the gears determine the transmission rate. Planetary gear sets come in stages. This gives you multiple transmission rate choices. Some companies offer small planetary gearboxes, while others offer larger ones. For those with special applications, make sure you check the torque, backlash, and ratio.
Whether the power is large or small, the planetary gearbox should be matched to the size of the drive. Some manufacturers also offer right-angle models. These designs incorporate other gear sets, such as a worm gear stage. Right-angle designs are ideal for situations where you need to vary the output torque. When determining the size of planetary gearboxes, make sure the drive shafts are lined up.
planetarygearbox

Applications

This report is designed to provide key information on the Global Applications of Planetary Gearbox Market, including the market size and forecast, competitive landscape, and market dynamics. The report also provides market estimates for the company segment and type segments, as well as end users. This report will also cover regional and country-level analysis, market share estimates, and mergers & acquisitions activity. The Global Applications of Planetary Gearbox Market report includes a detailed analysis of the key players in the market.
The most common application of a planetary gearbox is in the automobile industry, where it is used to distribute power between two wheels in a vehicle’s drive axle. In a four-wheel-drive car, this system is augmented by a centre differential. In hybrid electric vehicles, a summation gearbox combines the combustion engine with an electric motor, creating a hybrid vehicle that uses one single transmission system.
In the Global Industrial Planetary Gearbox Market, customer-specific planetary gears are commonly used for automated guided vehicles, intra-logistics, and agricultural technology. These gears allow for compact designs, even in tight spaces. A three-stage planetary gear can reach 300 Nm and support radial loads of 12 kN. For receiver systems, positioning accuracy is critical. A two-stage planetary gearbox was developed by CZPT. Its internal gear tension reduces torsional backlash, and manual controls are often used for high-quality signals.
The number of planetary gears is not fixed, but in industrial applications, the number of planetary gears is at least three. The more planetary gears a gearbox contains, the more torque it can transmit. Moreover, the multiple planetary gears mesh simultaneously during operation, which results in high efficiency and transmittable torque. There are many other advantages of a planetary gearbox, including reduced maintenance and high speed.

China Planetary Gearbox for Stepper DC Motor     design of planetary gearboxChina Planetary Gearbox for Stepper DC Motor     design of planetary gearbox
editor by czh 2023-03-27

Planetary Gearbox

As one of the leading planetary gearbox manufacturers, suppliers, and exporters of mechanical products, We offer planetary gearbox and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the planetary gearbox.

Recent Posts