China High Torque 1 HP 60 Rpm Gear Motor Planetary Gear Reducer Speed Gearbox nema 23 planetary gearbox

Item Description

Item Description

Substantial torque 1 hp sixty rpm gear motor planetary equipment reducer pace gearbox 

NGW sequence gearboxes consist of single-stage(NGW11-NGW121),two-stage(NGW42-NGW122) and stree-stage(NGW73-NGW123).

1.Model Number
NGW, NGW-L, NGW-S, NGW-QJ 

2.Applications
NGW Planetary Gear Models is commonly utilized in several regions this kind of as metallurgy, mine, lifting, transportation, textile, cement, gentle market, chemical, pharmaceutical, dye printing and so on. 

Thorough Images

3.Product Traits
(1) Tiny quantity, light-weight bodyweight, effectively-knitted construction, large transmission energy and large load capacity. In contrast with the normal cylindrical gear reducers of the very same degree, its excess weight is lower 1/2 and quantity is only 1/2-1/3 of the previous.
(2) Large transmission efficiency. 1-phase is up to 97%, 2-phase 94%, 3-stage ninety one%.
(3) The range of transmission electricity is quite broad, from 1kw to 1300kw.
(4) NGW Planetary Equipment Units is made with challenging-tooth-faced, and can be utilised widely and in long period.
(5) Huge transmission ratio 

four.Technical Knowledge(NGW)
Original Variation NGW Sequence
Shafts Placement: In Line
one Stage: NGW11~NGW121 Ratio: 2.8~twelve.5
2 Phase: NGW42~NGW122 Ratio: fourteen~160
3 Stage: NGW73~NGW123 Ratio: one hundred eighty~2000

New Design NGW Sequence
Shafts Position: In Line, Parallel Shaft
NAD(NAF) – 1 Phase, Foot Mounted(Flange Mounted), In Line
NAZD(NAZF) – 1 Stage, Foot Mounted(Flange Mounted), Parallel Shaft
NBD(NBF) – 2 Stage, Foot Mounted(Flange Mounted), In Line

Item Parameters

NGW-S Sequence Planetary Gearboxes
Shafts Position: Appropriate Angle
Gearset: Spiral Bevel Gear Pair Integrated With Planetary Gear Set
2 Stage: NGW-S42~NGW-S122 Ratio: 11.2~eighty
three Stage: NGW-S73~NGW-S123 Ratio: fifty six~five hundred
 

Phase Model Size                   Ratio Rated Power
Solitary-stage NGW11~NGW121  one~12 2.8~12.5 2. 8-1314KW
Two-phase NGW42~NGW122  1~12 fourteen-160 .7-517KW
Three-phase NGW73~NGW123  one~six one hundred eighty-2000 .16-47.1KW

Types Measurements Nominal Ratio Enter Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD 200,224,…1800,2000 4~5.six

six.3~9

50~400mm

40~360mm

sixty~630mm
NAF 200,224,…500,560 four~5.6

six.3~nine

50~130mm

forty~100mm

60~220mm
NAZD two hundred,224,…1400,1600 10~18 thirty~240mm 60~560mm
NAZF two hundred,224,…five hundred,560 ten~eighteen 30~85mm 60~220mm
NBD 250,280,…1800,2000 20~25

28~50

30~280mm eighty~630mm
NBF 250,280,…500,560 twenty~twenty five

28~fifty

30~80mm 80~220mm
NBZD 250,280,…1400,1600 fifty six~a hundred twenty five 28~170mm 80~560mm
NBZF 250,280,…five hundred,560 fifty six~one hundred twenty five 28~55mm 80~220mm
NCD 315,355,…1800,2000 112~400 25~150mm one hundred twenty~630mm
NCF 315,355,…500,560 112~four hundred twenty five~50mm a hundred and twenty~220mm
NCZD 315,355,…1800,2000 450~1250 twenty~170mm a hundred and twenty~630mm
NCZF 315,355,…five hundred,560 450~1250 twenty five~45mm a hundred and twenty~220mm

Packaging & Delivery

Business Profile

Right after Income Service

Pre-sale companies 1. Decide on tools design.
two.Style and manufacture merchandise according to clients’ particular necessity.
three.Teach complex individual for clientele
Services during offering 1.Pre-examine and acknowledge goods ahead of shipping.
2. Support clients to draft fixing strategies.
After-sale solutions one.Aid clientele to get ready for the initial design scheme.
two. Train the 1st-line operators.
3.Get initiative to eliminate the difficulties rapidly.
4. Supply specialized exchanging.

FAQ

one.Q:What sorts of gearbox can you make for us?

A:Major merchandise of our firm: UDL sequence pace variator,RV collection worm equipment reducer, ATA sequence shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred versions and hundreds of specifications
2.Q:Can you make as per custom made drawing?
A: Sure, we supply tailored support for clients.
three.Q:What is your terms of payment ?
A: 30% Progress payment by T/T right after signing the deal.70% ahead of shipping and delivery
four.Q:What is your MOQ?
A: 1 Set

If you have any need for our merchandise please feel totally free to make contact with me.

US $400
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Function: Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Customization:

###

Stage Model Size                   Ratio Rated Power
Single-stage NGW11~NGW121  1~12 2.8~12.5 2. 8-1314KW
Two-stage NGW42~NGW122  1~12 14-160 0.7-517KW
Three-stage NGW73~NGW123  1~6 180-2000 0.16-47.1KW

###

Types Sizes Nominal Ratio Input Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD 200,224,…1800,2000 4~5.6

6.3~9

50~400mm

40~360mm

60~630mm
NAF 200,224,…500,560 4~5.6

6.3~9

50~130mm

40~100mm

60~220mm
NAZD 200,224,…1400,1600 10~18 30~240mm 60~560mm
NAZF 200,224,…500,560 10~18 30~85mm 60~220mm
NBD 250,280,…1800,2000 20~25

28~50

30~280mm 80~630mm
NBF 250,280,…500,560 20~25

28~50

30~80mm 80~220mm
NBZD 250,280,…1400,1600 56~125 28~170mm 80~560mm
NBZF 250,280,…500,560 56~125 28~55mm 80~220mm
NCD 315,355,…1800,2000 112~400 25~150mm 120~630mm
NCF 315,355,…500,560 112~400 25~50mm 120~220mm
NCZD 315,355,…1800,2000 450~1250 20~170mm 120~630mm
NCZF 315,355,…500,560 450~1250 25~45mm 120~220mm

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.
US $400
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Function: Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Customization:

###

Stage Model Size                   Ratio Rated Power
Single-stage NGW11~NGW121  1~12 2.8~12.5 2. 8-1314KW
Two-stage NGW42~NGW122  1~12 14-160 0.7-517KW
Three-stage NGW73~NGW123  1~6 180-2000 0.16-47.1KW

###

Types Sizes Nominal Ratio Input Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD 200,224,…1800,2000 4~5.6

6.3~9

50~400mm

40~360mm

60~630mm
NAF 200,224,…500,560 4~5.6

6.3~9

50~130mm

40~100mm

60~220mm
NAZD 200,224,…1400,1600 10~18 30~240mm 60~560mm
NAZF 200,224,…500,560 10~18 30~85mm 60~220mm
NBD 250,280,…1800,2000 20~25

28~50

30~280mm 80~630mm
NBF 250,280,…500,560 20~25

28~50

30~80mm 80~220mm
NBZD 250,280,…1400,1600 56~125 28~170mm 80~560mm
NBZF 250,280,…500,560 56~125 28~55mm 80~220mm
NCD 315,355,…1800,2000 112~400 25~150mm 120~630mm
NCF 315,355,…500,560 112~400 25~50mm 120~220mm
NCZD 315,355,…1800,2000 450~1250 20~170mm 120~630mm
NCZF 315,355,…500,560 450~1250 25~45mm 120~220mm

###

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

Benefits of a Planetary Gearbox With Output Shaft

The output shaft of a Planetary Gearbox connects to the driven wheels, while the input shaft comes from the engine. These gears are interlinked and create a wide range of gear reductions, which are necessary to get a vehicle rolling comfortably. Gear reductions are the place where the various “gears” are located. Here are some examples. They can help you determine what you need for your vehicle. You might also want to learn about planetary gears.
planetarygearbox

Planetary gearboxes

Modern cars are most likely equipped with planetary gearboxes. If you’re unsure if your vehicle uses planetary gears, you should first consult your car’s owner’s manual. If not, contact your dealership’s service department for more information. Otherwise, you can do a quick search on the internet to find out whether your car has a planetary gearbox. These gearboxes are generally more complex than ordinary gears. Additionally, they are equipped with more parts and require lubrication.
In addition to their low noise levels, planetary gearboxes are also remarkably efficient at transmission. These features make them ideal for applications requiring high torque and small footprints. Unfortunately, there are many different types of planetary gearboxes on the market, making it difficult to find the right one. The following article will give you some guidelines to help you choose the right planetary gearbox for your needs. Let’s take a look!

Planetary gears

A planetary gearbox has two main components: the sun gear (also known as the central or input) and the planet gears (also known as outer or peripheral). These gears are connected together by a carrier to the output shaft of the machine. In some applications, it is necessary to use a planetary gearbox with lubrication to prevent wear and tear. A planetary gearbox also has a small ring gear that helps hold the planet gears together.
The main advantage of a planetary gearbox is that it uses several teeth that engage at once, allowing for high-speed reduction with a small number of gears. Because the gears are relatively small, they have lower inertia than their larger counterparts. Planetary gearboxes are compact, which makes them popular for space-constrained applications. Because of their compact size and efficiency, planetary gearboxes are also commonly used in motor vehicles.

Planetary gearboxes with output shaft

For high-speed, dynamic applications, planetary gearbox units with output shaft provide the optimal solution. Thanks to their low inertia, these gearheads deliver superior performance in many industrial applications. Additionally, their wide range of variants allows users to select the perfect product for their application. This article examines some of the key benefits of planetary gearboxes with output shaft. Read on to learn more.
The planetary gearbox has two major components: a sun gear and planet gears. The sun gear is usually the input gear, while the planet gears are located at the outer edges of the system casing. Planet gears are held together by a carrier that is connected to the output shaft. Before choosing a particular gearbox for your application, make sure that you check the specific requirements and the environment to which the unit will be subjected.
A planetary gearbox has less stages of gears, and thus lower backlash compared to spur gearboxes. Backlash is lost motion that occurs when the teeth of the gears are out of perfect alignment. This problem is common in all gears, but is significantly less in planetary gearboxes. As such, planetary gearboxes are more efficient. They can also be customized according to the specific engine model and motor flange.
planetarygearbox

Planetary gearboxes with carrier

A planetary gearbox is a type of gearbox with three or more stages. They have a sun gear, which is usually the input gear, and planet gears, also called the outer gears. The carrier that connects the planet gears to the output shaft is called a ring gear. A planetary gearbox is generally designed to meet specific application and environmental requirements, but there are some factors to consider when choosing one.
The compact footprint of planetary gear sets results in high heat dissipation. This can be a problem in applications with sustained performance or high speeds. As a result, planetary gear sets often include lubricants, which present a cooling effect while also reducing noise and vibration. Some planetary gears even feature a carrier to make the installation process easier. Here are some things to keep in mind when choosing a planetary gear set.
Planetary gearboxes with carrier have several advantages over other types of gearboxes. Unlike conventional gearboxes, planetary gears have a common central shaft, and the tangential forces between the gears cancel out at the center of the ring gear. Because of this, planetary gearboxes are commonly used in input/output applications, and their compact size allows for a wide range of gear reductions. These gears can also produce higher torque density.

Planetary gearboxes with traction

Planetary gears are similar to the planetary system, in that each pinion rotates around a sun gear. The output of the planetary gear unit is lower than the drive rotation speed, but the torque is higher. As the number of planet gear wheels increases, so does the torque. Planetary gear systems contain three to four planet gears, and each is in constant mesh with the others. Power applied to any one member rotates the entire assembly.
Typical applications for planetary gear sets include high-precision motion control. In these applications, high torque, torsional stiffness, and low backlash are required. Planetary gear sets are also ideal for motors with higher speeds. A number of factors contribute to the reliability of these devices. The low backlash and large torque capacity of a planetary gear motor allow them to be used in a wide range of applications.

Planetary gearboxes with electric motors

If you’re in the market for a new gearbox, you may have already heard about planetary gearboxes. The planetary gearbox is a high-efficiency, low-noise gearbox. CZPT manufactures high-torque planetary gearboxes with low backlash. They also make economy planetary gearboxes for lower loads. However, with so many different types available, choosing the right one for your needs can be challenging.
These planetary gearboxes are a compact alternative to conventional pinion-and-gear reducers. They offer high-speed reduction and high torque transfer, and are often used for space-constrained applications. But before you can understand how they work, you’ll need to understand a little about their construction. There are a few things to look for that you may not have noticed before.
The most common type of planetary gearbox is a PM81/LN. It features a set of DC brush motors with diameter 77mm, a stator, and two or more outer gears. Each of these gears is connected to an output shaft through a carrier. They can also be used with brakes, encoders, or a clutch. A planetary gearbox is one of the most reliable gearbox types on the market.

Planetary gearboxes with hydraulic motors

A planetary gearbox is a combination of two gears, the sun and the planets. The sun gear rotates at high speed, while the planets roll around and orbit around the ring gear. The output shaft has the same direction of rotation as the input shaft. The benefits of a planetary gearbox include high reduction ratios, efficiency, space-saving compactness, and higher overload capacity. These gears are also more stable and compact, and they do not suffer from self-locking properties.
Planetary gearboxes are a highly efficient way to power hydraulic lifts. They can be input via electric, hydraulic, or air motors. The drive arrangement can be mounted on a bare shaft, splined shaft, or a parallel keyed input shaft. Depending on the application, bespoke gearboxes can be manufactured with a variety of features and functions.
planetarygearbox

Planetary gearboxes with combustion engines

There are many different applications of planetary gear sets. The most common is the distribution of power between two wheels in a car’s drive axle. Four-wheel drives use two axle differentials, which are further augmented by a centre differential. Hybrid electric vehicles use summation gearboxes to distribute power from the combustion engine to the wheels and to an electric motor. Planetary gear sets also combine the two different types of motors to form one hybrid vehicle.
To understand how planetary gear sets work, it is important to understand the underlying mechanical principles. For example, Fig. 4.6 shows a stick diagram illustrating two planetary gear sets connected by a lever. The two levers are the same length, so the system is analogous to a single lever. When calculating the torque, it is essential to consider the lever diagram. Similarly, if two gear sets are connected by vertical links, the horizontal links must be horizontal.

China High Torque 1 HP 60 Rpm Gear Motor Planetary Gear Reducer Speed Gearbox     nema 23 planetary gearboxChina High Torque 1 HP 60 Rpm Gear Motor Planetary Gear Reducer Speed Gearbox     nema 23 planetary gearbox
editor by czh 2022-12-17

Tags: 1 rpm gear motor | 1 rpm high torque motor | 1 rpm motor | 60 rpm | 60 rpm gear motor | 60 rpm high torque motor | 60 rpm motor | china gearbox | china motor | gear | gear gearbox | gear motor | gear motor gearbox | gear motor reducer | gear motor rpm | gear motor speed reducer | gear motor torque | gear reducer | gear reducer gearbox | gear reducer motor | gear reducer speed | gear speed reducer | gearbox | gearbox china | gearbox gear | gearbox motor | gearbox motor speed reducer | gearbox planetary | gearbox reducer | gearbox rpm | gearbox speed | gearbox speed reducer | high gear | high rpm gearbox | high speed gear motor | high speed gear reducer | high speed gearbox | high speed motor | high torque gear motor | high torque gearbox | high torque gearbox motor | high torque motor | high torque planetary gearbox | hp motor | motor | motor 1 hp | motor gearbox | motor gearbox china | motor motor | motor nema 23 | motor planetary gearbox | motor reducer | motor reducer gearbox | nema 23 gear reducer | nema 23 gear reducer gearbox | nema 23 gearbox | nema 23 planetary gearbox | nema gear reducer | nema gearbox | nema gearbox planetary | nema motor | nema planetary gearbox | planetary gear | planetary gear motor | planetary gear reducer | planetary gearbox | planetary gearbox nema | planetary gearbox nema 23 | planetary motor | planetary reducer | planetary reducer gearbox | planetary reducer motor | planetary speed reducer | reducer | reducer gear motor | reducer gearbox | reducer motor | reducer speed | rpm gear | rpm gear motor | rpm motor | rpm reducer | speed gear | speed gear motor | speed gear reducer | speed gearbox | speed gearbox reducer | speed planetary gearbox | speed reducer | speed reducer gear | speed reducer gearbox | speed reducer gearbox motor | speed reducer motor | speed reducer torque | torque gearbox | torque motor | torque planetary gearbox

Planetary Gearbox

As one of the leading planetary gearbox manufacturers, suppliers, and exporters of mechanical products, We offer planetary gearbox and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the planetary gearbox.

Recent Posts